Cartref / Chynhyrchion / Golchwyr / Selio Wasieri / Cynnwys

Chynhyrchion

Golchwyr Selio Metel

Safon: DIN7603
Nwyddau: Wasieri Selio Metel
Enw arall: Gasgedi DIN 7603
Deunydd: Dur
Diamedr: M2/ M2.5/ M3/ M3.5/ M4/ M5/ M6/ M7/ M8/ M10/ M12/ M14/ M16/ M18/ M20/ M22/ M24/ M27/ M30/ M36/ M42/ M48/ M56/ M64/ M72/ M80/ M90/ M100
Gorffen: Plaen, Du, Sinc Platiog, Galfanedig Wedi'i Drochi'n Poeth, Ocsidiad, Dacromet, Ffosffadu, Electroplate Cadmiwm, Platiau Nicel
MOQ: 1000kgs
Amser Arweiniol: 30 i 60 diwrnod

Anfon ymchwiliad

Cyflwyniad Cynnyrch

Metal Sealing Washers-AYA

Fel cyflenwr byd-eang o atebion cau wedi'u teilwra, mae proses senvice AYA hefyd mor agos at gwsmeriaid â chynhyrchion AYA. O ddisgrifio anghenion i wasanaethau dilynol, bydd AYA yn brydlon ac yn gwneud unrhyw ymdrech i helpu cwsmeriaid i ddatrys unrhyw broblemau cau sy'n codi, i ddileu pryder cwsmeriaid.

Disgrifiad o'r Cynnyrch

Enw Cynnyrch	Golchwyr Selio Metel
Enwir hefyd	Gasgedi DIN 7603
Deunydd	Dur
Safonol	DIN7603
Diamedr	Φ4×8, Φ5×7.5, Φ5.5×8, Φ6.5×9.5, Φ7×15, Φ8×11.5, Φ10×13.5, Φ12×15.5, Φ12×16, Φ12×19, Φ14×18, Φ14×20, Φ15×19, Φ15×23, Φ16×20, Φ17×21, Φ18×22, Φ20×24, Φ21×26, Φ22×27, Φ23×28, Φ24×29, Φ25×30, Φ26×31, Φ27×32, Φ28×33, Φ30×36, Φ32×38, Φ33×39, Φ35×41, Φ36×42, Φ38×44, Φ39×46, Φ40×47, Φ42×49, Φ44×51, Φ45×52, Φ48×55, Φ50×57, Φ52×60, Φ54×62, Φ55×63, Φ56×64, Φ58×66, Φ60×68, Φ64×72, Φ65×74, Φ70×79, Φ75x84, Φ78×88, Φ80×90, Φ85×95, Φ90×100
Gorffen	Plaen, Du, Sinc Platiog, Galfanedig Wedi'i Drochi'n Poeth, Ocsidiad, Dacromet, Ffosffadu, Electroplate Cadmiwm, Platiau Nicel

Maint			Φ4×8	Φ5×7.5	Φ5.5×8	Φ6.5×9.5	Φ7×15	Φ8×11.5	Φ10×13.5	Φ12×15.5	Φ12×16	Φ12×19
Maint			Φ4×8	Φ5×7.5	Φ5.5×8	Φ6.5×9.5	Φ7×15	Φ8×11.5	Φ10×13.5	Φ12×15.5	Φ12×16	Φ12×19
d	lleiaf=maint enwol		4.2	5.2	5.7	6.7	7.2	8.2	10.2	12.2	12.2	12.2
d	max		4.5	5.5	6	7	7.5	8.5	10.5	12.5	12.5	12.5
dc	uchafswm=maint enwol		7.9	7.4	7.9	9.4	14.9	11.4	13.4	15.4	15.9	18.9
dc	min		7.7	7.2	7.7	9.2	14.7	11.2	13.2	15.2	15.7	18.7
L	Al, St, Cu, Vf, Zn	Maint Enwol	1	1	1	1	1.5	1	1	1.5	1.5	1.5
		max	1.2	1.2	1.2	1.2	1.7	1.2	1.2	1.7	1.7	1.7
		min	0.8	0.8	0.8	0.8	1.3	0.8	0.8	1.3	1.3	1.3
	FA	Maint Enwol	1	1	1	1	1	1	1	1.5	1.5	1.5
		max	1.2	1.2	1.2	1.2	1.2	1.2	1.2	1.65	1.65	1.65
		min	0.8	0.8	0.8	0.8	0.8	0.8	0.8	1.35	1.35	1.35
	Prg	Maint Enwol	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5
		max	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6
		min	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
fesul 1000 o unedau≈kg	±25 y cant	FA	0.066	0.039	0.043	0.063	0.373	0.092	0.111	0.195	0.23	0.461
		Vf	0.036	0.022	0.024	0.035	0.228	0.051	0.062	0.107	0.126	0.282
		Prg	0.017	0.01	0.011	0.016	0.113	0.023	0.028	0.033	0.038	0.139
		Pr	0.01	0.006	0.007	0.01	0.069	0.014	0.017	0.02	0.023	0.085
		Al	0.089	0.053	0.058	0.085	0.559	0.124	0.15	0.264	0.311	0.691
		St	0.259	0.155	0.168	0.247	1625	0.362	0.435	0.767	0.905	2.01
		Cu	0.294	0.176	0.191	0.28	1.842	0.412	0.493	1.87	1.03	2.28
		Zn	-	-	-	-	1.478	-	-	-	-	1.828
Maint			Φ14×18	Φ14×20	Φ15×19	Φ15×23	Φ16×20	Φ17×21	Φ18×22	Φ20&×24	Φ21×26	Φ22×27
Maint			Φ14×18	Φ14×20	Φ15×19	Φ15×23	Φ16×20	Φ17×21	Φ18×22	Φ20&×24	Φ21×26	Φ22×27
d	lleiaf=maint enwol		14.2	14.2	15.2	15.2	16.2	17.2	18.2	20.2	21.2	22.2
d	max		14.5	14.5	15.5	15.5	16.5	17.5	18.5	20.5	21.5	22.5
dc	uchafswm=maint enwol		17.9	19.9	18.9	22.9	19.9	20.9	21.9	23.9	25.9	26.9
dc	min		17.7	19.7	18.7	22.7	19.7	20.7	21.7	23.7	25.7	26.7
L	Al, St, Cu, Vf, Zn	Maint Enwol	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
		max	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7
		min	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3
	FA	Maint Enwol	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
		max	1.65	1.65	1.65	1.65	1.65	1.65	1.65	1.65	1.65	1.65
		min	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35	1.35
	Prg	Maint Enwol	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5
		max	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6
		min	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
fesul 1000 o unedau≈kg	±25 y cant	FA	0.264	0.44	0.28	0.644	0.3	0.32	0.328	0.36	0.5	0.522
		Vf	0.145	0.242	0.154	0.394	0.165	0.176	0.18	0.198	0.275	0.288
		Prg	0.045	0.074	0.047	0.195	0.05	0.053	0.055	0.06	0.083	0.087
		Pr	0.027	0.044	0.028	0.119	0.03	0.032	0.033	0.036	0.05	0.052
		Al	0.356	0.595	0.378	0.967	0.403	0.433	0.444	0.488	0.675	0.705
		St	1.03	1.73	1.1	2.81	1.179	1.26	1.29	1.42	1.96	2.05
		Cu	1.17	1.96	1.25	3.19	1.33	1.43	1.46	1.16	2.22	2.32
		Zn	-	1.71	-	2.556	-	-	-	-	-	-
Maint			Φ23×28	Φ24×29	Φ25×30	Φ26×31	Φ27×32	Φ28×33	Φ30×36	Φ32×38	Φ33×39	Φ35×41
Maint			Φ23×28	Φ24×29	Φ25×30	Φ26×31	Φ27×32	Φ28×33	Φ30×36	Φ32×38	Φ33×39	Φ35×41
d	lleiaf=maint enwol		23.3	24.3	25.3	26.3	27.3	28.3	30.3	32.3	33.3	35.3
d	max		23.6	24.6	25.6	26.6	27.6	28.6	30.6	32.6	33.6	35.6
dc	uchafswm=maint enwol		27.9	28.9	29.9	30.9	31.9	32.9	35.9	37.9	38.9	40.9
dc	min		27.7	28.7	29.7	30.7	31.7	32.7	35.7	37.7	38.7	40.7
L	Al, St, Cu, Vf, Zn	Maint Enwol	2	2	2	2	2	2	2	2	2	2
		max	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8
	FA	Maint Enwol	2	2	2	2	2	2	2	2	2	2
		max	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8
	Prg	Maint Enwol	1	1	1	1	1	1	1	1	1	1
		max	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15
		min	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
fesul 1000 o unedau≈kg	±25 y cant	FA	0.705	0.733	0.765	0.793	0.815	0.845	1.13	1.2	1.24	1.3
		Vf	0.386	0.403	0.422	0.435	0.45	0.463	0.62	0.655	0.673	0.713
		Prg	0.177	0.184	0.19	0.197	0.204	0.212	0.28	0.298	0.305	0.323
		Pr	0.054	0.055	0.057	0.059	0.062	0.064	0.084	0.09	0.092	0.097
		Al	0.95	0.99	1.03	1.07	1.1	1.14	1.52	1.6	1.65	1.74
		St	2.77	2.88	2.99	3.1	3.21	3.31	4.41	4.66	4.8	5.07
		Cu	3.24	3.26	3.4	3.51	3.64	3.75	5	5.27	5.44	5.73
		Zn	-	-	-	-	-	-	-	-	-	-
Maint			Φ36×42	Φ38×44	Φ39×46	Φ40×47	Φ42×49	Φ44×51	Φ45×52	Φ48×55	Φ50×57	Φ52×60
Maint			Φ36×42	Φ38×44	Φ39×46	Φ40×47	Φ42×49	Φ44×51	Φ45×52	Φ48×55	Φ50×57	Φ52×60
d	lleiaf=maint enwol		36.3	38.3	39.3	40.3	42.3	44.3	45.3	48.3	50.2	52.5
d	max		36.6	38.6	39.6	40.6	42.6	44.6	45.6	48.6	50.5	53
dc	uchafswm=maint enwol		41.9	43.9	45.9	46.9	48.9	50.9	51.9	54.9	56.9	59.8
dc	min		41.7	43.7	45.7	46.7	48.7	50.7	51.7	54.7	56.7	59.5
L	Al, St, Cu, Vf, Zn	Maint Enwol	2	2	2	2	2	2	2	2	2	2.5
		max	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.7
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	2.3
	FA	Maint Enwol	2	2	2	2	2	2	2	2	2	2
		max	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8
	Prg	Maint Enwol	1	1	1	1	1	1	1	1	1	1.5
		max	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.15	1.7
		min	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85	0.85	1.3
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
fesul 1000 o unedau≈kg	±25 y cant	FA	1.34	1.41	1.74	1.76	1.83	1.91	1.95	2.07	2.15	2.9
		Vf	0.732	0.767	0.943	0.966	1.02	1.06	1.08	1.14	1.18	1.6
		Prg	0.332	0.348	0.428	0.438	0.457	0.478	0.479	0.518	0.54	0.87
		Pr	0.1	0.104	0.128	0.132	0.138	0.144	0.144	0.156	0.162	0.174
		Al	1.79	1.88	2.32	2.37	2.47	2.58	2.64	2.8	2.9	3.85
		St	5.2	5.47	6.73	6.88	7.2	7.5	7.67	8.15	8.45	11.4
		Cu	5.88	6.15	6.96	7.8	8.15	8.5	8.68	9.23	9.56	12.9
		Zn	-	-	-	-	-	-	-	-	-	-
Maint			Φ54×62	Φ55×63	Φ56×64	Φ58×66	Φ60×68	Φ64×72	Φ65×74	Φ70×79	Φ75×84	Φ78×88
Maint			Φ54×62	Φ55×63	Φ56×64	Φ58×66	Φ60×68	Φ64×72	Φ65×74	Φ70×79	Φ75×84	Φ78×88
d	lleiaf=maint enwol		54.5	55.5	56.5	58.5	60.5	64.5	65.5	70.5	75.5	78.5
d	max		55	56	57	59	61	65	66	71	76	79
dc	uchafswm=maint enwol		61.8	62.8	63.8	65.8	67.8	71.8	73.8	78.8	83.8	87.8
dc	min		61.5	62.5	63.5	65.5	67.5	71.5	73.5	78.5	83.5	87.5
L	Al, St, Cu, Vf, Zn	Maint Enwol	2.5	2.5	2.5	2.5	2.5	2.5	2.5	2.5	2.5	2.5
		max	2.7	2.7	2.7	2.7	2.7	2.7	2.7	2.7	2.7	2.7
		min	2.3	2.3	2.3	2.3	2.3	2.3	2.3	2.3	2.3	2.3
	FA	Maint Enwol	2	2	2	2	2	2	2	2	2	2
		max	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2
		min	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8	1.8
	Prg	Maint Enwol	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
		max	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7	1.7
		min	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3	1.3
	Pr		0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3	0.3
fesul 1000 o unedau≈kg	±25 y cant	FA	3	3.11	3.14	3.22	3.32	3.52	3.58	4.68	5	5.86
		Vf	1.67	1.72	1.75	1.77	1.83	1.94	1.97	2.58	2.76	3.22
		Prg	0.9	0.93	0.942	0.965	1	1.05	1.07	1.4	1.5	1.76
		Pr	0.18	0.186	0.187	0.193	0.2	0.213	0.214	0.28	0.3	0.352
		Al	4.06	4.2	4.3	4.35	4.48	4.8	4.83	6.35	6.75	7.9
		St	11.8	12.2	12.3	12.6	13	13.85	14	18.4	19.6	23
		Cu	13.4	13.8	13.95	14.3	14.8	15.7	15.9	20.9	22.3	26.1
		Zn	-	-	-	-	-	-	-	-	-	-
Maint			Φ80×90	Φ85×95	Φ90×100	-	-	-	-	-	-	-
Maint			Φ80×90	Φ85×95	Φ90×100	-	-	-	-	-	-	-
d	lleiaf=maint enwol		80.7	85.7	90.7	-	-	-	-	-	-	-
d	max		81.2	86.2	91.2	-	-	-	-	-	-	-
dc	uchafswm=maint enwol		89.8	94.8	99.8	-	-	-	-	-	-	-
dc	min		89.5	94.5	99.5	-	-	-	-	-	-	-
L	Al, St, Cu, Vf, Zn	Maint Enwol	2.5	2.5	2.5	-	-	-	-	-	-	-
		max	2.7	2.7	2.7	-	-	-	-	-	-	-
		min	2.3	2.3	2.3	-	-	-	-	-	-	-
	FA	Maint Enwol	2	2	2	-	-	-	-	-	-	-
		max	2.2	2.2	2.2	-	-	-	-	-	-	-
		min	1.8	1.8	1.8	-	-	-	-	-	-	-
	Prg	Maint Enwol	1.5	1.5	1.5	-	-	-	-	-	-	-
		max	1.7	1.7	1.7	-	-	-	-	-	-	-
		min	1.3	1.3	1.3	-	-	-	-	-	-	-
	Pr		0.3	0.3	0.3	-	-	-	-	-	-	-
fesul 1000 o unedau≈kg	±25 y cant	FA	5.95	6.25	6.61	-	-	-	-	-	-	-
		Vf	3.25	3.43	3.63	-	-	-	-	-	-	-
		Prg	1.79	1.88	2	-	-	-	-	-	-	-
		Pr	0.358	0.376	0.4	-	-	-	-	-	-	-
		Al	8	8.45	8.95	-	-	-	-	-	-	-
		St	23.1	24.5	25.9	-	-	-	-	-	-	-
		Cu	26.3	27.8	29.5	-	-	-	-	-	-	-
		Zn	-	-	-	-	-	-	-	-	-	-

Manylion Cynnyrch

Metal Sealing Washers-detail

Manteision Cynnyrch

Metal Sealing Washers-advantages

Manteision Golchwr Selio DIN 7603

1. Mae cyswllt metel-i-metel yn darparu rheolaeth torque ac ymddangosiad gorffenedig.

2. Gellir defnyddio wasieri selio metel i selio'r elfen rhag difrod allanol.

3. Mae gasgedi DIN 7603 wedi'u cynllunio ar gyfer hylifau neu nwyon gwactod a gwasgedd uchel.

4. Defnyddir y golchwr selio DIN 7603 i selio i mewn ac allan o hylifau, nwyon, solidau a llwch.

5. Mae wasieri selio ar gael ar gyfer sgriwiau a bolltau safonol.

Arolygiad Ansawdd

Metal Sealing Washers-check

Mae'r arolygwyr QC yn brofiadol iawn yn y wybodaeth am y cynhyrchion yn ogystal â'r technegau gweithgynhyrchu. Defnyddir offerynnau arbennig i gynnal profion lluosog i sicrhau y gallai'r cynhyrchion terfynol fodloni gofynion y farchnad a chwsmeriaid.

Pecynnu a Llwytho Cynhwysydd

Metal Sealing Washers-package

Gellid addasu'r pecynnu yn unol ag anghenion cwsmeriaid. A byddai'n cael ei atgyfnerthu'n llawn i atal iawndal annisgwyl yn ystod y cludo.

Mae system warysau a logisteg aeddfed, ac offer digidol yn gwneud y cyflenwad nwyddau yn effeithlon iawn.

Senarios Defnydd

Metal Sealing Washers-usage

Pam Dewis AYA?

AYA advantage

Mae AYA yn darparu gwasanaethau unigryw i 1000 a mwy o aelodau o bob cwr o'r byd bob blwyddyn, gyda system datrysiad gwasanaeth cadwyn unigryw, dim ond clicio ar y llygoden sydd angen i chi gael datrysiad cau unigryw a mwynhau gwasanaethau drws-i-ddrws.